Products

• low voltage current transformers
• using in low voltage switchboards up to 2500A
• certified calibration
• customized on request

Continue HERE in new window please
(Czech language only)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
• temperature range: -30…+90° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• controlling the power element by pulse width modulation (PWM)
• PWM output 0..12V / 25mA
• selectable frequency of output pulses 1Hz, 10Hz, 100Hz or 1kHz
• PWM controlled by voltage, current or potentiometer 1 to 10kOhm
• auxiliary power supply 19-300V DC 90-250V AC
• conversion accuracy <0.2%
• separation input - output - power 4000Vef
• the converter's user configuration
• small size
• DIN rail mounting 35

• spring-loaded protection tube that ensures metallic contact between bearing and sensor
• basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
• stem from stainless steel Ø 3, 4, 5 or 6mm
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor

• connector DIN43650
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• purpose: to sink intro the lock fitting bracket or air conditioning
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 5 to 8mm (or others), fitting length „Y“ according to order
• purpose: to sink intro the lock fitting bracket or air conditioning
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec)
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• accuracy according to used sensor
• metal parts are made from stainless steel 17248
• enclosure IP code: IP65
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• connector M12x1 EC-FS4-L/16
• diameter 6 or 8mm (or others), fitting length „Y“ according to order
• screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
• temperature range: -30…+100° (T=c. 7sec), extended range -30°...+400°C
• used programmable transmitter PMA300 with output 4…20mA
• power supply by output loop 8…28V DC, ripple max. 0,5V
• any measuring range <-50…+400>°C, min. span 50°C
• accuracy ±0,5% from span (max. ±0,25°C)
• another parameters are shown in the datasheet of used transmitter PMA300
• metal parts are made from stainless steel 17248
• enclosure IP code: IP67 (threaded connector)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• základní provedení: stonek Ø8mm, jímka Ø10mm,
• použití pro -25…+200°C (T=cca 30sec) nebo –25…+400°C (T=cca 50sec)
• výběr ze šroubení: G1/2; M20x1,5; M27x2, G3/4...
• lze osadit převodníky
     - PP200 s výstupem 4…20mA
     - PP300 s výstupem 0…10V
     - PX300 s výstupem 4-20mA s galvanickým oddělením
     - PPL100 s výstupem ASCII nebo MODBUS
• napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
• libovolný měřicí rozsah <-50…+80>°C, min. rozpětí 50°C
• přesnost ±0,5% z rozsahu (max. ±0,25°C)
• ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

This converter creates data transmission between Modbus RTU and Modbus TCP. It provides long-distance access to MODBUS RTU via ETHERNET.

• configuration via internal website
• galvanic isolation ETHERNET - MODBUS: 1500V
• power supply 8 .. 30V DC
• negative terminal is connected to line RS485
• DIN 35 rail-mounted design

• analog measurement of the input signal
• transducer for measurement DC current or voltage
• directly current measurements up to ±10A, voltage up to ±1000V DC
• accuracy <0,1%
• response time 1ms
• dielectric strength input / output 4kV
• loop powered

• fast respons time (0,1ms)
• 8 calibrated ranges
• isolation unipolar and bipolar signals
• setting range by slid switch DIP on the board
• bandwidth : 0..5kHz for -0,5dB
• fast analog channel digitally driven
• accuracy 0,1%
• power supply 18VDC for loop-powered transmitter on input
• dielectric strength input / output / supply power 4kV
• auxiliary power supply in wide range 19 to 300VDC & 90 to 250VAC

• limit guard with user-defined level
• up to two separate switching / disconnecting channels
• input signal U / I or RTD or Tc
• LED display 4digity height
• relay output: no relay or 1 to 2 changeover relays
• analog output: 0-20mA or 4-20mA or 0-10V or no output
• auxiliary power supply in a wide range of 19 to 300VDC and 90 to 250VAC
• power consumption: max. 2VA
• monitoring of set limit of switching and opening of two switches according to input signal value
• display of measured value in range -999… 9999 digit
• isolation strength input / power 4kV

• adapter for Programming Transducers with Galvanic Separation
• direct replacement for adapters AX-USB a PK-USB
• for transduceres:
     PP200, PP300, PMA300, PX300, PP210/212, PP210/S
     PP200-BOX, PP300-BOX, PX300-BOX
     PX310, PX310S,ISOL600, PXN30
     SIXISOL310, SIXISOL600
     TS30, TS30K, TS30DIN, DPR40
• programming software Rawet Studio

• PP200 is mounted in a connection head DIN "B" dimension or any box
• converter without galvanic isolation, converts temperature from RTD to 4..20mA
• easy programming range by AX-USB adapter (AY-USB) without power supply
• the transmitter can be programmed for the types of sensors: Pt100, Pt1000, Ni 100, Ni 1000, KTY81..

• converter without galvanic isolation
• it converts temperature from RTD or resistance from resistance transmitter to 4..20mA
• easy programming by AX-USB adapter (AY-USB) without power supply
• power supply by output loop 8…30V DC, any polarity
• DIN 35 rail-mounted design

• zjednodušený princip měření pH
• doporučený postup kalibrace sondy s převodníkem PHXC
• tabulky převodu pH na mV, 0..10V a 4..20mA
• rady a řešení problémů

• basic design: 6x50mm Pt100/B with cable 4w 1m
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable (T=c. 7sec)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

• screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
• it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
• temperature range -30…+80°C with PVC cable (T=c. 7sec)
• dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)