Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Products

Total 405 items

PT38 350°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
  • temperature range -10…+350°C with cable BIMV-CNTEVS
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €20.30 excl. VAT

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.90 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €76.00 excl. VAT

PT50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €34.90 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
    • it can be use transmitters
         - PP200 with output 4…20mA
         - PP300 with output 0…10V
         - PX300 with output 4…20mA with galvanic isolation
  •    - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €70.60 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €39.90 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €76.50 excl. VAT

NZ124

Power supply unit 24V DC with s toroid transformer and linear voltage regulator, max. 24mA

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

  • supply voltage: 230V AC ± 10% (45 – 65 Hz)
  • output voltage: 24V DC, ±5%
  • output power capacity: 0.5VA (22mA)
  • protection: transformer with thermal fuse + electronic cut-out

€50.00 excl. VAT

NZ224

Power supply unit 24V DC with s toroid transformer and linear voltage regulator, max. 200mA

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

  • supply voltage: 230V AC ± 10% (45 – 65 Hz)
  • output voltage: 24V DC, ±5%
  • output power capacity: 5VA (200mA)
  • protection: transformer with resettable thermal fuse

€58.40 excl. VAT

Ht40T

PID controller with the real-time clock
  • 1 measuring inputs
  • 3 outputs
  • communication line
  • 3 independent programs
  • max. 10 steps for program
  • easy operation

from €239.20 excl. VAT

HtCeramic

PID programmable controller for ceramic, stomatology and laboratory ovens
  • 1 measuring input
  • 3 outputs
  • control for heating as well as cooling
  • communication line
  • 20 programs with 15 steps
  • start of the program with the key
  • start of the program with the real-time clock
  • observing of the program course
  • datalogger, memmory of measured values
  • easy operation

from €376.00 excl. VAT

HtIndustry

Programmable PID controller for industrial applications
  • 1 input
  • 2 control outputs (heating, cooling)
  • alarm output
  • 4 event outputs
  • 2 communication lines (PC, Master - Slave)
  • 2 digital inputs
  • 30 programs with 15 steps
  • change in a program during its course
  • start of the program with the key
  • start of the program with the real-time clock
  • datalogger, memmory of measured values

from €358.80 excl. VAT

Ht700

Alarm unit / two state controller / PID controller
  • 3 initial configurations of device:
    • meter / alarm unit
    • two-state controller
    • PID controller
  • 1 measuring input
  • 2 outputs
  • communication lines

from €111.20 excl. VAT

Ht100

Multichannel meter
  • 10 galvanic insulated inputs
  • thermocouple inputs
  • voltage inputs 0-5V, 1-5V, 0-10V
  • current inputs 0-20mA, 4-20mA
  • datalogger, max. 2000 logs
  • 2 digital inputs
  • communication line RS232, EIA485, protocol MODBUS RTU
  • 2 alarm outputs

 


from €260.00 excl. VAT

PT50N

Temperature sensor with stainless head, proof design, IP68. Designed for chemicals and food industry.
  • Thermometers has the same parameters as common design with aluminium connection head „B“:
  • Without transmitter (analogy PT50, PT50H, PT50J, PT55):
       - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
       - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
       - it can be use transmitters
          • PP200 with output 4…20mA
          • PP300 with output 0…10V  
          • PX300 with output 4…20mA with galvanic isolation
          • PPL100 with output ASCII or MODBUS
       - any measuring range <-50…+80>°C, min. span 50°C
       - another parameters are shown in the datasheet of used transmitter
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

From €69.20 excl. VAT

HC265

Active high pressure pH electrode HC265
  • pH range: 0..13
  • working temperature 0..+70°C
  • zero point: pH = 7
  • max. pressure: 8 bar

From €72.00 excl. VAT

OP033

Surge protector for inputs of temperature and resistance transmitters
  • maximum operating voltage: 3V
  • input signal: resistance connected 3W
  • serial resistance: 8,2 ohm
  • voltage protection level core-PE at 10kA (8/20 μs): 300V
  • voltage protection level core-core at 100A (8/20 μs): 12V

€29.20 excl. VAT

DSB250PH

In stock
Rail-mounting terminal block with overvoltage protection
  • it protect 2 wire opposite overvoltage rail-rail and rail-ground
  • DC Breakdown (500V/s): 250V =
  • surge current (8/20uSec): max. 20kA
  • DIN 35 rail-mounted design

€14.80 excl. VAT

PTP10K

Snímač teploty pro montáž na stěnu, plastové pouzdro s kabelovým teploměrem, velmi odolné provedení (IP65), výstup 4..20mA, 0..10V nebo RS485 (ASCII nebo MODBUS).
  • určen pro montáž na stěnu s krytím IP65
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PPL100 s výstupem ASCII nebo MODBUS
       - PX300 s s výstupem 4…20mA a galvanickým oddělením
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah, min. rozpětí 10°C
  • přesnost ±0,3% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €74.80 excl. VAT