Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Products

Total 406 items

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €80.80 excl. VAT

PT50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.20 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
    • it can be use transmitters
         - PP200 with output 4…20mA
         - PP300 with output 0…10V
         - PX300 with output 4…20mA with galvanic isolation
  •    - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €75.00 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €42.40 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €81.30 excl. VAT

PT55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.10 excl. VAT

PTP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €75.00 excl. VAT

NZ124

Power supply unit 24V DC with s toroid transformer and linear voltage regulator, max. 24mA

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

  • supply voltage: 230V AC ± 10% (45 – 65 Hz)
  • output voltage: 24V DC, ±5%
  • output power capacity: 0.5VA (22mA)
  • protection: transformer with thermal fuse + electronic cut-out

€53.10 excl. VAT

NZ224

Power supply unit 24V DC with s toroid transformer and linear voltage regulator, max. 200mA

The power supplies are intended to power the converters, isolating modules, converter stem thermometers and other devices in the industry. They are mounted into switchboxes on a DIN 35 standard electrical equipment mounting rail.

  • supply voltage: 230V AC ± 10% (45 – 65 Hz)
  • output voltage: 24V DC, ±5%
  • output power capacity: 5VA (200mA)
  • protection: transformer with resettable thermal fuse

€62.20 excl. VAT

HtIndustry

Programmable PID controller for industrial applications
  • 1 input
  • 2 control outputs (heating, cooling)
  • alarm output
  • 4 event outputs
  • 2 communication lines (PC, Master - Slave)
  • 2 digital inputs
  • 30 programs with 15 steps
  • change in a program during its course
  • start of the program with the key
  • start of the program with the real-time clock
  • datalogger, memmory of measured values

from €363.20 excl. VAT

Ht700

Alarm unit / two state controller / PID controller
  • 3 initial configurations of device:
    • meter / alarm unit
    • two-state controller
    • PID controller
  • 1 measuring input
  • 2 outputs
  • communication lines

from €112.60 excl. VAT

Ht100

Multichannel meter
  • 10 galvanic insulated inputs
  • thermocouple inputs
  • voltage inputs 0-5V, 1-5V, 0-10V
  • current inputs 0-20mA, 4-20mA
  • datalogger, max. 2000 logs
  • 2 digital inputs
  • communication line RS232, EIA485, protocol MODBUS RTU
  • 2 alarm outputs

 


from €263.20 excl. VAT

PP200-BOX

wall-mounting temperature transmitter without galvanic separation, IP65
  • inbuilt transmitter PP200 powered from output current loop
  • it is programmable for sensors Pt100, Pt1000, Ni 100, Ni1000
  • current output 4-20mA
  • programmable range, min. span 10°C
  • accuracy ±(0,07%+0,1°C)
  • easy programming range by AX-USB adapter (AY-USB) without power supply

€66.00 excl. VAT

PP300-BOX

wall-mounting temperature transmitter without galvanic separation, IP65
  • inbuilt transmitter PP300 with power supply 12-30V DC
  • it is designed for:
       - resistance from resistance transmitter (potentiometer) 0..100Ω, 0..1kΩ and 0..10kΩ
       - voltage 0-10V DC, thermistors by request
  • voltage output 0-10V
  • programmable range, min. span 10°C
  • accuracy ±(0,07%+0,1°C)
  • easy programming range by AX-USB adapter (AY-USB) without power supply

€72.70 excl. VAT

PX300-BOX

wall-mounting temperature transmitter with galvanic isolation, IP65
  • inbuilt transmitter PX300 powered from output current loop
  • galvanic isolation input - output - power supply: 1200Veff
  • transmitter with 4-20mA output is designed for:
       - temperature from any thermocouple with linearization and cold junction compensation
       - resistance from resistance transmitter (potentiometer)
       - thermistors, KTY, NTC e.t.c.
  • easy programming range by AX-USB adapter (AY-USB) without power supply

€98.60 excl. VAT

DSB250PH

In stock
Rail-mounting terminal block with overvoltage protection
  • it protect 2 wire opposite overvoltage rail-rail and rail-ground
  • DC Breakdown (500V/s): 250V =
  • surge current (8/20uSec): max. 20kA
  • DIN 35 rail-mounted design

€14.90 excl. VAT

PTP10K

Snímač teploty pro montáž na stěnu, plastové pouzdro s kabelovým teploměrem, velmi odolné provedení (IP65), výstup 4..20mA, 0..10V nebo RS485 (ASCII nebo MODBUS).
  • určen pro montáž na stěnu s krytím IP65
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PPL100 s výstupem ASCII nebo MODBUS
       - PX300 s s výstupem 4…20mA a galvanickým oddělením
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah, min. rozpětí 10°C
  • přesnost ±0,3% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €75.80 excl. VAT

Kabel BC PUR 5m 80°C

In stock
Kabel k teploměrům s konektorem M12
  • kabel v provedení PUR s délkou 5m
  • ve 4w provedení
  • do teploty 80°C
  •  


€13.90 excl. VAT

Kabel RKC 4/7 M12 1m

Kabel k teploměrům s konektorem M12
  • kabel je vyráběn na zakázku s různou délkou přívodu, počtem vodičů a typem kabelu
  • v provedení 2w, 3w, 4w
  • s PVC kabelem do 80°C
  • se silokonovým nebo teflonovým  kabelem do 200°C
  •  

 


from €12.20 excl. VAT