Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Temperature sensors

Total 57 items

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €40.30 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €80.80 excl. VAT

PT50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.20 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
    • it can be use transmitters
         - PP200 with output 4…20mA
         - PP300 with output 0…10V
         - PX300 with output 4…20mA with galvanic isolation
  •    - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €75.00 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €42.40 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €81.30 excl. VAT

PT55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.10 excl. VAT

PTP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €75.00 excl. VAT

PT50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €35.00 excl. VAT

PTP50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €72.90 excl. VAT

..

In stock
Available sensors for instalation into thermometers:

(You can see description of sensors after click on Types, detailed tables are below)

Type

Description

TCR [ppm/°C]

Tolerance [°C]

Max. temp. [°C]

A

B

 Pt100

 Platinum sensor 100Ω / 0°C

3851

0,15+0,002t

0,30+0,005t

-70..+600

 Pt1000

 Platinum sensor 1000Ω / 0°C

3851

0,15+0,002t

0,30+0,005t

-70..600

 Ni100/6180

 Nickel sensor 100Ω / 0°C

6180

0,20+0,0035t

0,40+0,007t

-60..+250

 Ni1000/6180

 Nickel sensor 1000Ω / 0°C

6180

0,20+0,0035t

0,40+0,007t

-60..+250

 Ni1000/5000

 Nickel sensor 1000Ω / 0°C

5000

0,20+0,0035t

0,40+0,007t

-60..+250

 Tc“J

 Termocouple Fe-Ko
 (Fe-CuNi)

c. 5,37mV/100°C
±0,0075t or ±2,5°C

-200..+750

 Tc“K“

 Termocouple Ch-A
 (NiCr-NiAl)

c. 4,80mV/100°C
±0,0075t or ±2,5°C

-200..+1200

 NTC…

 Termistor NTC (variety of)
 100Ω..100kΩ/25°C

nonlinear

±2..±5%
(depending on design)

-40..+125

 PTC…

 Thermistor PTC with T sens
 +70..+160°C (by 10°C)

nonlinear

±5°C

max. +180

 KTY…

 Linear semicond. sensor
 1000Ω (2000Ω) / +25°C

c. 0,79%/K

±1 .. ±5°C
(depending on design)

-55..+150 (+300)

 SMT160-30

 Sensor SMARTEC
 (PWM modulation)

-

±0,7°C

-45..+130

 DS 18B20

 Sensor DALLAS
 (digital output)

-

±0,5°C

-10..+85

 Bimetal "on"

 Ton=+45..+145°C (by 5°C)

-

Ts ±5°C

145

 Bimetal "off"

 Toff=+45..+145°C (by 5°C)

-

Ts ±5°C

145

Attachment for downloads:
(in TXT format for easy linearization in PC)


PTxx-R

new
Cable output with 90°angle
  • sawing of space
  • it can be add for all cable sensors with stem diameter 6mm

+ €2.50 excl. VAT

PT31K (DIN)

Temperature sensor for liquids with easy connecting by connector DIN43650. Optional dimensions and design.
  • connector DIN43650
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
  • temperature range: -30…+100° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP65
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€24.70 excl. VAT

PT31M12

Temperature sensor for liquids with easy connecting by connector M12. Optional dimensions and design.
  • connector M12x1 EC-FS4-L/16
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
  • temperature range: -30…+90° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP67 (threaded connector)
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€29.00 excl. VAT

PTP10K

Snímač teploty pro montáž na stěnu, plastové pouzdro s kabelovým teploměrem, velmi odolné provedení (IP65), výstup 4..20mA, 0..10V nebo RS485 (ASCII nebo MODBUS).
  • určen pro montáž na stěnu s krytím IP65
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PPL100 s výstupem ASCII nebo MODBUS
       - PX300 s s výstupem 4…20mA a galvanickým oddělením
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah, min. rozpětí 10°C
  • přesnost ±0,3% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €75.80 excl. VAT

PT31PR

new
Neizolovaný snímač pro měření teploty ložisek strojů.
  • kabelové povedení Ø 4 až 8mm, vhodný nejen do domků ložisek strojů- neizolované provedení
  • lze osadit Pt100/A, B, dvou až čtyřvodičové zapojení, dvojité čidlo, Pt1000, Ni1000, KTY, PTC, termočlánky…
  • rozsah teplot -60…+350°C (T=cca 10sec)
  • elektrická pevnost 1500V, izolační odpor min. 20 MΩ
  • Ponor Y = hloubka otvoru + 10mm ! Stlačení pružiny je možné až 20mm.

from €23.10 excl. VAT

PM55PR

new
Snímač s pružinou  a trvalým přítlakem. Malá hliníková hlavice s nerezovým stonkem, IP56.
  • základní provedení Ø6mm, -25…+100°C (T=cca 10sec)
  • výběr ze šroubení: M10x1 ;M12x1,5; M12x1,75; G1/4, G1/2; M20x1,5.....
  • stonek je možné vyrobit Ø  4, 5 nebo 6mm
  • lze osadit Pt100/A, B, dvou až čtyřvodičovém zapojení, dvojité čidlo, Pt1000, Ni1000, KTY, PTC, termočlánky…
  • přesnost závislá na typu použitého čidla

from €36.50 excl. VAT

PT20

In stock
Interior temperature sensor, IP30, -20…+60°C, without transmitter.
  • sensor is built-in to plastic box, wall mounting design
  • sensor 1x Pt100A, B, Pt1000, Ni1000 or others
  • accuracy according to used sensor

from €9.40 excl. VAT

NIP20

Low-cost interior temperature sensor, IP30, -20°...+60°C, with transmitter 0…5V.
  • sensor is built-in to plastic box, wall mounting design
  • connecting by three wires (GND, OUT, +Ucc)
  • power supply 12…34V DC
  • voltage ripple max. 0,5V
  • measuring range 0…+50°C (or others)
  • output 0…5V
  • accuracy +/- 0,3°C

€25.40 excl. VAT

PT35

Temperature sensor for bearing, adjustable length. Adjustable threads is not hermetic. Metal parts are made from  stainless steel 17248, optional dimensions and design.
  • adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -40…+150°C (T=c. 15sec)
  • dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €39.90 excl. VAT