Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Temperature sensors

Total 57 items

PT36

In stock
Sensor Ø c. 3,5mm for motor winding. Sensor is sealed into tube from insulation material, case is not exactly cylindrical.
  • sealed design, stem from insulation material
  • -40…+150°C (class „F“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €12.60 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €42.40 excl. VAT

PTP50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €81.30 excl. VAT

PT55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.10 excl. VAT

PTP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V  
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €75.00 excl. VAT

PT50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €35.00 excl. VAT

PTP50H

Temperature sensor without screw fitting. It is suitable into thermowells or mounting by adjustable threads. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • stem from stainless steel Ø 3, 4, 5, 6, 8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PX300 with output 4…20mA with galvanic isolation
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €72.90 excl. VAT

PM55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Small aluminium connection head with stainless stem, IP56.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.10 excl. VAT

PMP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Small aluminium connection head with stainless stem, IP56. Output 4…20mA.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • inbuilt programmable transmitter PMA300 with 4…20mA output
  • power supply by output loop 8…30V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter PMA300

from €84.40 excl. VAT

PT31M12

Temperature sensor for liquids with easy connecting by connector M12. Optional dimensions and design.
  • connector M12x1 EC-FS4-L/16
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
  • temperature range: -30…+90° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP67 (threaded connector)
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€29.00 excl. VAT

PTP10K

Snímač teploty pro montáž na stěnu, plastové pouzdro s kabelovým teploměrem, velmi odolné provedení (IP65), výstup 4..20mA, 0..10V nebo RS485 (ASCII nebo MODBUS).
  • určen pro montáž na stěnu s krytím IP65
  • lze osadit převodníky
       - PP200 s výstupem 4…20mA
       - PP300 s výstupem 0…10V
       - PPL100 s výstupem ASCII nebo MODBUS
       - PX300 s s výstupem 4…20mA a galvanickým oddělením
  • napájení po výstupním signálu  8…28V ss,  zvlnění max. 0,5V
  • libovolný měřicí rozsah, min. rozpětí 10°C
  • přesnost ±0,3% z rozsahu (max. ±0,25°C)
  • ostatní parametry jsou uvedeny v popisu převodníku, který je v přístroji použit

from €75.80 excl. VAT

PT31PR

new
Uninsulated cable thermometer for bearing, with spring.
  • spring-loaded protection tube that ensures metallic contact between bearing and sensor
  • cable thermometer Ø 4 .. 8mm for bearing, uninsulated stem
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -60…+350°C (T=c. 10sec)
  • dielectric strength: 1500V, insulation resistance min. 20MΩ
  • Immersion length Y = depth of hole+ 10mm! Spring compressionis max. 20mm.

from €23.10 excl. VAT

PM55PR

new
Bearing temperature sensor with spring-loaded stem. Small aluminium connection head with stainless stem, IP56.
  • spring-loaded protection tube that ensures metallic contact between bearing and sensor
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €36.50 excl. VAT

PMP55PR

new
Bearing temperature sensor with spring-loaded stem. Small aluminium connection head with stainless stem, IP56. Output 4…20mA.
  • spring-loaded protection tube that ensures metallic contact between bearing and sensor
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • inbuilt programmable transmitter PMA300 with 4…20mA output
  • power supply by output loop 8…30V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter PMA300

from €72.90 excl. VAT

PT31PRI

new
Insulated cable thermometer for bearing, with spring.
  • spring-loaded protection tube that ensures metallic contact between bearing and sensor
  • cable thermometer Ø 6mm for bearing, with insulated stem
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -60…+200°C (T=c. 10sec)
  • dielectric strength: 1500V, insulation resistance min. 20MΩ
  • Immersion length Y = depth of hole+ 10mm! Spring compressionis max. 20mm.

from €49.70 excl. VAT

Kabel BC PUR 5m 80°C

In stock
Kabel k teploměrům s konektorem M12
  • kabel v provedení PUR s délkou 5m
  • ve 4w provedení
  • do teploty 80°C
  •  


€13.90 excl. VAT

PT20

In stock
Interior temperature sensor, IP30, -20…+60°C, without transmitter.
  • sensor is built-in to plastic box, wall mounting design
  • sensor 1x Pt100A, B, Pt1000, Ni1000 or others
  • accuracy according to used sensor

from €9.40 excl. VAT

NIP20

Low-cost interior temperature sensor, IP30, -20°...+60°C, with transmitter 0…5V.
  • sensor is built-in to plastic box, wall mounting design
  • connecting by three wires (GND, OUT, +Ucc)
  • power supply 12…34V DC
  • voltage ripple max. 0,5V
  • measuring range 0…+50°C (or others)
  • output 0…5V
  • accuracy +/- 0,3°C

€25.40 excl. VAT

PT35

Temperature sensor for bearing, adjustable length. Adjustable threads is not hermetic. Metal parts are made from  stainless steel 17248, optional dimensions and design.
  • adjustable immersion length, adjustable thread M12x1,75 or G1/2 or others by request - inclusive hermetic design.
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -40…+150°C (T=c. 15sec)
  • dielectric strength: 1500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €39.90 excl. VAT

PT34

In stock
Miniature and high-speed response design for motor winding.
  • sensor Pt100 is covered by teflon shrinkable tube only
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • max. +200°C
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €11.10 excl. VAT