Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Temperature sensors

Total 55 items

PT36

In stock
Sensor Ø c. 3,5mm for motor winding. Sensor is sealed into tube from insulation material, case is not exactly cylindrical.
  • sealed design, stem from insulation material
  • -40…+150°C (class „F“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €10.40 excl. VAT

PT33

In stock
Flat design for stator slot.
  • sensor is sealed into laminated plastic material and covered by teflon shrinkable tube
  • -40…+180°C (class „H“)
  • it can be use Pt100/A, B, from two to four wire connection, Pt1000, Ni1000, PTC, thermocouples…
  • leads are made from stranded wire with PTFE insulation, 2,5m length

from €13.00 excl. VAT

PT38 80°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • temperature range -30…+80°C with PVC cable
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €20.30 excl. VAT

PT38 200°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, PTC, thermocouples…
  • temperature range -40…+200°C with cable MCBE-AFEP
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €20.30 excl. VAT

PT38 350°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
  • temperature range -10…+350°C with cable BIMV-CNTEVS
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

from €20.30 excl. VAT

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €37.90 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €76.00 excl. VAT

PT50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €34.90 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

from €70.60 excl. VAT

PT50J

Temperature sensor for screwing into wall of pipes or tanks. Aluminium connection head with stainless stem, IP56.
  • basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
  • measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
  • screw fitting: G1/2; M20x1,5; M27x2, G3/4..
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

from €39.90 excl. VAT

PMP55

Temperature sensor with thin stem and high-speed response for screwing into thermowells or welded-on pieces. Small aluminium connection head with stainless stem, IP56. Output 4…20mA.
  • basic design Ø6mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 or 6mm
  • inbuilt programmable transmitter PMA300 with 4…20mA output
  • power supply by output loop 8…30V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter PMA300

from €79.40 excl. VAT

PT50N

Temperature sensor with stainless head, proof design, IP68. Designed for chemicals and food industry.
  • Thermometers has the same parameters as common design with aluminium connection head „B“:
  • Without transmitter (analogy PT50, PT50H, PT50J, PT55):
       - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
       - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
       - it can be use transmitters
          • PP200 with output 4…20mA
          • PP300 with output 0…10V
          • PPL100 with output ASCII or MODBUS
       - any measuring range <-50…+80>°C, min. span 50°C
       - another parameters are shown in the datasheet of used transmitter
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

From €69.20 excl. VAT

..

In stock
Available sensors for instalation into thermometers:

(You can see description of sensors after click on Types, detailed tables are below)

Type

Description

TCR [ppm/°C]

Tolerance [°C]

Max. temp. [°C]

A

B

 Pt100

 Platinum sensor 100Ω / 0°C

3851

0,15+0,002t

0,30+0,005t

-70..+600

 Pt1000

 Platinum sensor 1000Ω / 0°C

3851

0,15+0,002t

0,30+0,005t

-70..600

 Ni100/6180

 Nickel sensor 100Ω / 0°C

6180

0,20+0,0035t

0,40+0,007t

-60..+250

 Ni1000/6180

 Nickel sensor 1000Ω / 0°C

6180

0,20+0,0035t

0,40+0,007t

-60..+250

 Ni1000/5000

 Nickel sensor 1000Ω / 0°C

5000

0,20+0,0035t

0,40+0,007t

-60..+250

 Tc“J

 Termocouple Fe-Ko
 (Fe-CuNi)

c. 5,37mV/100°C
±0,0075t or ±2,5°C

-200..+750

 Tc“K“

 Termocouple Ch-A
 (NiCr-NiAl)

c. 4,80mV/100°C
±0,0075t or ±2,5°C

-200..+1200

 NTC…

 Termistor NTC (variety of)
 100Ω..100kΩ/25°C

nonlinear

±2..±5%
(depending on design)

-40..+125

 PTC…

 Thermistor PTC with T sens
 +70..+160°C (by 10°C)

nonlinear

±5°C

max. +180

 KTY…

 Linear semicond. sensor
 1000Ω (2000Ω) / +25°C

c. 0,79%/K

±1 .. ±5°C
(depending on design)

-55..+150 (+300)

 SMT160-30

 Sensor SMARTEC
 (PWM modulation)

-

±0,7°C

-45..+130

 DS 18B20

 Sensor DALLAS
 (digital output)

-

±0,5°C

-10..+85

 Bimetal "on"

 Ton=+45..+145°C (by 5°C)

-

Ts ±5°C

145

 Bimetal "off"

 Toff=+45..+145°C (by 5°C)

-

Ts ±5°C

145

Attachment for downloads:
(in TXT format for easy linearization in PC)


PTxx-R

new
Cable output with 90°angle
  • sawing of space
  • it can be add for all cable sensors with stem diameter 6mm

+ €2.40 excl. VAT

PT31K (DIN)

Temperature sensor for liquids with easy connecting by connector DIN43650. Optional dimensions and design.
  • connector DIN43650
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
  • temperature range: -30…+100° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP65
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€23.30 excl. VAT

PT31M12

Temperature sensor for liquids with easy connecting by connector M12. Optional dimensions and design.
  • connector M12x1 EC-FS4-L/16
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
  • temperature range: -30…+90° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP67 (threaded connector)
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€27.20 excl. VAT

PT31K/H

Temperature sensor for liquids with easy connecting by connector DIN43650. Optional dimensions and design.
  • connector DIN43650
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • purpose: to sink intro the lock fitting bracket or air conditioning
  • basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
  • temperature range: -30…+100° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP65
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€23.30 excl. VAT

PT31M12/H

Temperature sensor for liquids with easy connecting by connector M12. Optional dimensions and design.
  • connector M12x1 EC-FS4-L/16
  • diameter 5 to 8mm (or others), fitting length „Y“ according to order
  • purpose: to sink intro the lock fitting bracket or air conditioning
  • basic design: 8x100mm Pt100/B G1/2 2w max. 100°C
  • temperature range: -30…+100° (T=c. 7sec)
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP65
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€27.20 excl. VAT

PTP31M12

new
Temperature sensor for liquids with transmitter 4…20mA and easy connecting by connector M12. Optional dimensions and design.
  • connector M12x1 EC-FS4-L/16
  • diameter 6 or 8mm (or others), fitting length „Y“ according to order
  • screw fitting: M10x1, M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • basic design: 8x100mm Pt100/B G1/2 2w max. 90°C
  • temperature range: -30…+90° (T=c. 7sec)
  • used programmable transmitter PMA300 with output 4…20mA
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter PMA300
  • metal parts are made from stainless steel 17248
  • enclosure IP code: IP67 (threaded connector)
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€75.60 excl. VAT