Limits monitors

Total 8 items

limit guard with user-defined level
up to two separate switching / disconnecting channels
input signal U / I or RTD or Tc
LED display 4digity height
relay output: no relay or 1 to 2 changeover relays
analog output: 0-20mA or 4-20mA or 0-10V or no output
auxiliary power supply in a wide range of 19 to 300VDC and 90 to 250VAC
power consumption: max. 2VA
monitoring of set limit of switching and opening of two switches according to input signal value
display of measured value in range -999… 9999 digit
isolation strength input / power 4kV

from €153.20 excl. VAT

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
input only RTD, R
supply voltage: 12V / 24V DC ± 25% without galvanic isolation
DIN rail mounting
the temperature adjusting element is inside the housing

€99.40 excl. VAT

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
supply voltage 24V DC ± 10% with galvanic separation 3kV
DIN rail mounting
the temperature adjusting element is inside the housing

€110.10 excl. VAT

two-state programmable switch for monitoring of electrical values or temperature
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
supply voltage 230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
DIN rail mounting
the temperature adjusting element is inside the housing

€110.10 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€101.70 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€108.80 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €105.80 excl. VAT

two-state programmable temperature monitor
compact design, IP 65 protection
output relay with changeover contact
Possibility of easy setting of switching value by potentiometer or programmed
power voltage:
    12V / 24V DC ± 25% without galvanic isolation
    24V DC ± 10% with galvanic isolation 3kV
    230V AC ± 10% (45 - 65 Hz) (transformer)
isolation strength input / output / power 4kV
the temperature adjusting element is inside the housing
It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
(Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €112.40 excl. VAT

DIGIREG 03.xxx