Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Limits monitors

Total 8 items
  • limit guard with user-defined level
  • up to two separate switching / disconnecting channels
  • input signal U / I or RTD or Tc
  • LED display 4digity height
  • relay output: no relay or 1 to 2 changeover relays
  • analog output: 0-20mA or 4-20mA or 0-10V or no output
  • auxiliary power supply in a wide range of 19 to 300VDC and 90 to 250VAC
  • power consumption: max. 2VA
  • monitoring of set limit of switching and opening of two switches according to input signal value
  • display of measured value in range -999… 9999 digit
  • isolation strength input / power 4kV

from €114.40 excl. VAT
  • two-state programmable switch for monitoring of electrical values or temperature
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • input only RTD, R
  • supply voltage: 12V / 24V DC ± 25% without galvanic isolation
  • DIN rail mounting
  • the temperature adjusting element is inside the housing

€76.00 excl. VAT
  • two-state programmable switch for monitoring of electrical values or temperature
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • supply voltage 24V DC ± 10% with galvanic separation 3kV
  • DIN rail mounting
  • the temperature adjusting element is inside the housing

€76.00 excl. VAT
  • two-state programmable switch for monitoring of electrical values or temperature
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • supply voltage 230V AC ± 10% (45 - 65 Hz) (transformer)
  • isolation strength input / output / power 4kV
  • DIN rail mounting
  • the temperature adjusting element is inside the housing

€76.00 excl. VAT
  • two-state programmable temperature monitor
  • compact design, IP 65 protection
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • power voltage:
        12V / 24V DC ± 25% without galvanic isolation
        24V DC ± 10% with galvanic isolation 3kV
        230V AC ± 10% (45 - 65 Hz) (transformer)
  • isolation strength input / output / power 4kV
  • the temperature adjusting element is inside the housing
  • It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
        (Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€76.00 excl. VAT
  • two-state programmable temperature monitor
  • compact design, IP 65 protection
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • power voltage:
        12V / 24V DC ± 25% without galvanic isolation
        24V DC ± 10% with galvanic isolation 3kV
        230V AC ± 10% (45 - 65 Hz) (transformer)
  • isolation strength input / output / power 4kV
  • the temperature adjusting element is inside the housing
  • It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
        (Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

€81.40 excl. VAT
  • two-state programmable temperature monitor
  • compact design, IP 65 protection
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • power voltage:
        12V / 24V DC ± 25% without galvanic isolation
        24V DC ± 10% with galvanic isolation 3kV
        230V AC ± 10% (45 - 65 Hz) (transformer)
  • isolation strength input / output / power 4kV
  • the temperature adjusting element is inside the housing
  • It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
        (Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €79.00 excl. VAT
  • two-state programmable temperature monitor
  • compact design, IP 65 protection
  • output relay with changeover contact
  • Possibility of easy setting of switching value by potentiometer or programmed
  • power voltage:
        12V / 24V DC ± 25% without galvanic isolation
        24V DC ± 10% with galvanic isolation 3kV
        230V AC ± 10% (45 - 65 Hz) (transformer)
  • isolation strength input / output / power 4kV
  • the temperature adjusting element is inside the housing
  • It is intended especially for monitoring of exceeding the set value, when the output relay switches (opens).
        (Eg when the air temperature drops below the set limit of + 4 ° C the heating is switched on).

from €84.00 excl. VAT