Rawet s.r.o.
Manufacturing of regulation and measurement technology, transducers, temperature sensors.
Čapkova 22, 678 01 Blansko  Česká republika
+420 516 416 942 rawet@rawet.cz
Ověřená firma - ekatalog.cz ISO 9001:2008

Products

Total 396 items

PT38 350°C

Sensor for contact surface temperature measurement. End of stem from  stainless steel is flatten with bore Ø4,2mm for surface mounting. Optional dimensions and design. For approximate measurement only.
  • basic design 6x50mm Pt100/B with cable 4w 1m
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, thermocouples…
  • temperature range -10…+350°C with cable BIMV-CNTEVS
  • dielectric strength: 500V, insulation resistance min. 20MΩ (circuit to metal parts)

€20.40 excl. VAT

PT40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

€38.00 excl. VAT

PTP40

Temperature sensor with high-speed response for for air conditioning. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8 x 400mm, -25…+100°C (T=c. 2,5sec in water)
  • mounting by special holder for air conditioning
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

€74.90 excl. VAT

PT50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56.
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
  • accuracy according to used sensor

€35.00 excl. VAT

PTP50

Temperature sensor for screwing into thermowells or welded-on pieces. Aluminium connection head with stainless stem, IP56. Output 4…20mA, 0…10V or RS485 (ASCII or MODBUS).
  • basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4 or others by request
  • stem from stainless steel Ø8 or 10mm
  • it can be use transmitters
       - PP200 with output 4…20mA
       - PP300 with output 0…10V
       - PPL100 with output ASCII or MODBUS
  • power supply by output loop 8…28V DC, ripple max. 0,5V
  • any measuring range <-50…+80>°C, min. span 50°C
  • accuracy ±0,5% from span (max. ±0,25°C)
  • another parameters are shown in the datasheet of used transmitter

€70.80 excl. VAT

Ht40T

PID regulátor řízený hodinami reálného času  
  • programově řízená žádaná hodnota
  • samostatné programy pro
       - všední dny
       - sobotu
       - neděli
  • komunikační linka RS232 nebo EIA485
  • každý program až 10 kroků

from €239.80 excl. VAT

HtCeramic

programový regulátor pro keramické a jiné pece
  • dvoupolohový regulátor
  • start programu pomocí klávesnice
  • start programu hodinami reálného času
  • 20 programů po 15-ti krocích
  • komunikační linka RS232 nebo EIA485 • dvoupolohový regulátor
  • regulace Master - Slave
  • automatické nastavování regulačních parametrů

from €377.00 excl. VAT

HtIndustry

průmyslový programový regulátor  
  • programově řízená žádaná hodnota
  • start programu pomocí klávesnice
  • start programu hodinami reálného času
  • 30 programů po 15-ti krocích
  • 2x komunikační linka RS232 nebo EIA485

from €359.70 excl. VAT

Ht700

regulátor, měřič, alarmová jednotka na DIN lištu
  • 3 inicializační konfigurace přístroje:
       - měřič / alarmová jednotka
       - dvoupolohový regulátor
       - PID regulátor
  • PID regulátor
  • komunikační linka RS232 nebo EIA485

from €111.50 excl. VAT

Ht100

multikanálový měříč
  • monitorování technologických procesů
  • až 10 galvanicky oddělených vstupů
  • termočlánkové vstupy
  • napěťové a proudové vstupy
  • 2 digitální vstupy
  • 2 alarmové výstupy
  • komunikační linka RS232 nebo EIA485

from €260.70 excl. VAT

PT50N

Temperature sensor with stainless head, proof design, IP68. Designed for chemicals and food industry.
  • Thermometers has the same parameters as common design with aluminium connection head „B“:
  • Without transmitter (analogy PT50, PT50H, PT50J, PT55):
       - it can be use Pt100/A, B, from two to four wire connection, double sensor, Pt1000, Ni1000, KTY, PTC, thermocouples…
       - basic design Ø8mm, -25…+200°C (T=c. 10sec) or –25…+400°C (T=c. 25sec)
  • With transmitter (analogy PTP50, PTP50H, PTP50H, PTP55):
       - it can be use transmitters
          • PP200 with output 4…20mA
          • PP300 with output 0…10V
          • PPL100 with output ASCII or MODBUS
       - any measuring range <-50…+80>°C, min. span 50°C
       - another parameters are shown in the datasheet of used transmitter
  • screw fitting: M12x1,5 M12x1,75; G1/4, G1/2; M20x1,5; M27x2, G3/4..
  • stem from stainless steel Ø 3, 4, 5 6, 8 or 10mm

From €69.30 excl. VAT

PHXC

Industrial pH transmitter
  • It provide a voltage corresponding pH value in range 0..14
  • optional output 4..20mA, 0..10V or MODBUS
  • dielectric strength input / output 2kV
  • DIN 35 rail-mounted design or wall-mounted plastic box
  • 2-wire temperature compensation Pt, Ni
  • calibration in 2 points 10/4pH and 7pH

€113.70 excl. VAT

HC265

Active high pressure pH electrode HC265
  • pH range: 0..13
  • working temperature 0..+70°C
  • zero point: pH = 7
  • max. pressure: 8 bar

From €72.20 excl. VAT

OP033

Surge protector for inputs of temperature and resistance transmitters
  • maximum operating voltage: 3V
  • input signal: resistance connected 3W
  • serial resistance: 8,2 ohm
  • voltage protection level core-PE at 10kA (8/20 μs): 300V
  • voltage protection level core-core at 100A (8/20 μs): 12V

€29.30 excl. VAT

free download

free download