Product detail PTP50J
- basic design: stem Ø8mm, thermowell Ø10mm or stem Ø6mm, thermowell Ø10mm
- measuring range-25…+200°C (T=c. 30sec) or –25…+400°C (T=c. 50sec)
- screw fitting: G1/2; M20x1,5; M27x2, G3/4..
- it can be use transmitters
- PP200 with output 4…20mA
- PP300 with output 0…10V
- PX300 with output 4…20mA with galvanic isolation
- PPL100 with output ASCII or MODBUS
- power supply by output loop 8…28V DC, ripple max. 0,5V
- any measuring range <-50…+80>°C, min. span 50°C
- accuracy ±0,5% from span (max. ±0,25°C)
- another parameters are shown in the datasheet of used transmitter
Related products
Total 7 items
- thermowells
- adjustable threads
- welded-on pieces
- holder for air conditioning
- převodník je určen do hlavice teploměru rozměr DIN „B“
- uživatelská konfigurace převodníku
- převodník s výstupem 0-10V je určen k převodu signálu z Pt100, Pt1000, Ni100 a Ni1000,
- PP200 is mounted in a connection head DIN "B" dimension or any box
- converter without galvanic isolation, converts temperature from RTD to 4..20mA
- easy programming range by AX-USB adapter (AY-USB) without power supply
- the transmitter can be programmed for the types of sensors: Pt100, Pt1000, Ni 100, Ni 1000, KTY81..
- transmitter is mounted in a connection head DIN "B" dimension or any box
- easy programming by AX-USB adapter (AY-USB) without power supply
- transmitter with 0..10V ouput is designed for:
- any RTD sensor, resistance transmitter or potentiometer 0..100Ω, 0..1kΩ and 0..10 kΩ
- voltage 0..10V, thermistors..
- transmitter is mounted in a connection head DIN "B" dimension or any box
- galvanic isolation input - output - power supply: 1200Vef
- easy programming by AX-USB adapter (AY-USB) without power supply
- Transmitter with 4..20mA ouput is designed for:
- any thermocouple with linearization and cold junction compensation
- any RTD sensor or resistance transmitter
- thermistors, KTY, NTC..
- transmitter is mounted in a connection head DIN "MAA" dimension or any box
- easy programming by AX-USB adapter (AY-USB) without power supply
- it converts temperature from RTD thermometer to 4..20mA
- transmitter can be set for sensors Pt100/Ni100 or Pt1000/Ni1000
- transmitter is mounted in a connection head DIN "B" dimension or any box
- it converts temperature from Pt100, Pt1000 or Ni1000 sensor to digital otput RS485
- transmitter has auto-recognize for Pt100 or Pt1000 sensors
- we can set it for other input signals too
- communication by RS485 line with master device on baud rate 600..19200Bd
čeština
